http://outdoortankless.com/ <br /> <br />In this how-to presentation I will show you how to connect the Eccotemp L5 Bundle and Quikker Connectors together. <br /> <br />Also, since you need a few non-included parts to connect all Eccotemp L5 bundle pieces together a lot of people have been asking us what parts they need to purchase separately. <br /> <br />We'll talk about these non-included parts which you can easily get from most hardware stores. <br /> <br />Depending on how you want to connect your water pump to a power source you may need a few extra parts to make that work. <br />For this presentation we're gonna use an AC/DC power adapter normally used for powering coolers but you can also connect the water pump directly to a deep cycle battery which you'll need if you're planning on setting it up in an area where there are no power outlets. <br /> <br />For this demonstration, we used a bucket as the water source but other options are available such as a water container, a rain barrel or even a lake. <br /> <br />In case you're wondering why use Quikker Connectors at all, here's why: <br />It's much easier to connect and disconnect a hose using the fast locks included with the Quikker Connectors than if you were directly connecting and disconnecting it to the L5 fittings at the bottom of the unit. <br />Quikker Connectors are meant to remain connected to the L5 permanently so no need to screw and unscrew anything in the cramped space where the fittings are located. <br /> <br />You can quickly assemble and disassemble your water heater setup in a snap and move your L5 around. <br /> <br />The water pressure is pretty incredible thanks to the 50 PSI generated by the Flojet water pump. It comes close to the pressure supplied by a home shower.
